Folding Instructions
Standard
Efun Bicycle
These bike models all fold essentially in the same manner.
Step 1: If your model is equipped with a
quick release mechanism to raise and lower the handlebars,
lower the handlebars first. If there is no such quick
release, proceed to Step 2.
Step 2: Fold the pedals so that they are
in a vertical position parallel to the bike. The pedals on
the newer models have a pull trigger type mechanism inside
the pedal at the side away from the bike. Pull this trigger
and the pedal is released to swing to the vertical position.
Other models have pedals that have push releases to free the
pedal. Detailed instructions for your model are provided in
the shipping carton.
Step 3: Right above the head tube/stem combination,
you will find a quick release folding mechanism that allows
you to flip the handlebars over and place them down beside
the front tire.
Step 4: You will next find a quick release
folding mechanism on the top tube of the bike that allows
you to swivel the front tire and handlebars to the rear beside
the back tire. At this point the front of the bike and the
front tire and handlebars are facing the rear alongside the
back tire.
Step 5: The last step is to use the quick
release under the seat to lower the seat so that the seat
tube sits on the ground and provides some stability to the
folded bike when it is sitting on the ground.
At this point you should be able to pull the bike on the two
wheels (which are tracking parallel) by placing your hand
under the seat front and pulling as you would a wagon.
Recumbent
Efun Bicycle
Step 1: Fold the pedals so that they are
in a vertical position parallel to the bike. The pedals
on the newer models have a pull trigger type mechanism inside
the pedal at the side away from the bike. Pull this trigger
and the pedal is released to swing to the vertical position.
Other models have pedals that have push releases to free
the pedal. Detailed instructions for your model are provided
in the shipping carton.
Step 2: Detach the suspension spring from
the fork holding it in place using the quick release.
Step 3: Lift the bicycle up by the seat
post or back support post and fold the rear tire underneath
the bicycle.
Step 4: Lower the saddle and back support.
Step 5: Unlock the folding mechanism on
the frame and fold the bike in half.
Step 6: Lower the handlebars.
Step 7: Right above the head tube/stem
combination, you will find a quick release folding mechanism
that allows you to flip the handlebars over and place them
down beside the front tire.
|
